Description:
This Smoke and Carbon Monoxide Detector provides two important safety devices in a single unit. Combination high accurate electrochemical sensor and photoelectric sensor. Electrochemical CO sensor alerts you to carbon monoxide danger, Photoelectric sensor detects smoke while minimizing false alarms. Battery-operated unit installs quickly and easily without an electrician. This carbon monoxide detector features two LED lights and includes a chirp signal and test / reset button. The alarm warnings are spoken with a loud volume, which will remind you potential danger so that you will take emergency measures in advance.
Easy to Install:
1. Turn the alarm body counterclockwise and take off the bracket.
2. Hold the bracket in the installation position as specified in the Recommended Locations,mark installation holes of the bracket with pencil.
3. Drill the two marked installation holes with a 3/16 inch(5mm)drill bit. Tap the two plastic grommets into holes with hammer.
4. Mount the bracket to the ceiling by inserting and tightening the supplied screws into plastic grommets.
5. Fix the alarm on the bracket and turn the alarm body clockwise , until fully inserted on the bracket.
Features:
Combined Carbon Monoxide and Smoke Alarm
Equipped with both photoelectric smoke sensor and electrochemical CO sensor, the carbon monoxide and smoke alarm can work independently of each other; every second counts; detects both fast and slow-burning fires, and instantly notifies you when dangerous smoke or CO concentration is detected while minimizing false alarms; provides the ultimate protection from 2 deadly threats, all contained in 1 unit.
Easy Install and Use
The carbon monoxide and smoke alarm can easily install with mounting bracket. No hardwired anymore, very convenient to install at home or bedroom - wall mount, screws included.
LCD Display
Clearly indicates real-time carbon monoxide (CO) concentration in the surrounding air, as well as the remaining battery life and working status of the alarm
Battery powered Smoke CO Detector
The carbon monoxide and smoke alarm can be installed quickly and easily. You Can Hear the low power alarm when the power is Close to Run out, and won’t Miss the Chance to Change the New Battery.
Specifications:
Type: Carbon Monoxide & Smoke Alarm
Size: As picture shown
Color: White
Power Supply: One 9V alkaline 6LR61 or carbon zinc battery 6F22 (not included)
Sensitivity Setting:
CO: sensitivity & time
50ppm: alarms with 60-90 minutes
100ppm: alarms with 10-40 minutes
300ppm: alarms with 3 minutes
Smoke: 1%-5% / FT OBS
Standby current: <100uA
Alarm Current: <75mA
Operation Ambient Condition: 5-400C, 20-90% R.H.
Package Included:
1 x Carbon Monoxide and Smoke Alarm
2 x Expansion Plugs
2 x Screws
